Brake System Specifications

Application	Specification
Application	Metric	English
Brake Drums
Inside Diameter - New	200 mm	7.87 in
Maximum Inside Diameter	201 mm	7.91 in
Maximum Radial Runout - Not Installed	0.04 mm	0.002 in
Wheel Cylinder Diameter - Rear	20.64 mm	0.81 in
Brake Rotors
Disc Type	Ventilated
Discard Thickness for 236 mm (9.29 in) Diameter Rotor	18 mm	0.709 in
Discard Thickness for 256 mm (10.08 in) Diameter Rotor	22 mm	0.866 in
Maximum Assembled Lateral Runout - Installed	0.06 mm	0.002 in
Maximum Groove Depth	0.40 mm	0.016 in
Maximum Lateral Runout - Not Installed	0.03 mm	0.001 in
Maximum Thickness Variation	0.10 mm	0.004 in
New Rotor Thickness - 236 mm (9.29 in) Diameter Rotor	20 mm	0.787 in
New Rotor Thickness - 256 mm (10.08 in) Diameter Rotor	24 mm	0.945 in
Rotor Diameter - Larger Size with SACL500 Stamping	256 mm	10.08 in
Rotor Diameter - Smaller Size with SACL485F Stamping	236 mm	9.29 in
Booster Ratio	5:1
Booster Size	241.3 mm	9.5 in
Fluid Capacity	0.5 L	0.5 qt
Master Cylinder
Bore Diameter	22.22 mm	0.87 in
Minimum Bore Diameter	20.64 mm	0.81 in
Caliper
Piston Minimum Diameter	54 mm	2.12 in