LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Swift + >> Repair and Diagnosis (Single Page) >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof System >> Repair Instructions >> Sunroof Module Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View of Sunshade
    GM1248303Courtesy of GENERAL MOTORS CORP.
  1. Install the sunshade.
    2. Fig 2: View of Sunroof Housing and Bolts
    GM1248301Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the sunroof housing.

    Tighten:  Tighten the sunroof housing bolts to 7 N.m (62 lb in).

    3. Fig 3: View of Motor Control Module and Electrical Connector
    GM1248300Courtesy of GENERAL MOTORS CORP.
  3. Install the motor control module.
  4. Manually position the sunroof glass in the fully closed position.
    5. Fig 4: View of Sunroof Module, Motor and Bolts
    GM1248299Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The sunroof motor assembly must be in the fully closed position before installation.
  5. Install the motor.

    Tighten:  Tighten the sunroof motor screws to 5 N.m (44 lb in).

  6. Install the drain hoses.
  7. Install the headliner. Refer to Headlining Trim Panel Replacement .
  8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals