Camber and Caster Check
Check camber and caster by camber caster kingpin gauge (1) and turning radius gauge (2). If measured value is out of specified value, check following items for damage, deformation and crack.
- Strut and component
- Suspension control arm and bush
- Suspension frame
- Wheel hub, steering knuckle or wheel bearing
- Vehicle body
Camber "a"
Sedan model (15 inch wheel) and hatchback model
Front: -10' ± 1°
Sedan model (17 inch wheel)
Front: -17' ± 1°
Caster "b"
Sedan model (15 inch wheel) and hatchback model
Front: 3°40' ± 2°
Sedan model (17 inch wheel)
Front: 3°46' ± 2°
NOTE:
Camber and caster are not adjustable structure.