LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> SX4 LE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature (ECT) Sensor Removal and Installation: Removal

  1. Disconnect negative cable at battery.
  2. Drain coolant referring to COOLING SYSTEM .
    WARNING: To avoid danger of being burned, do not remove radiator cap while engine and radiator are still hot. Scalding fluid and steam can be blown out under pressure if cap is taken off too soon.
  3. Disconnect connector from ECT sensor (1).
    Fig 1: Identifying ECT Sensor
    G04846715Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove ECT sensor from water outlet cap.
scientia non olet · About LEMON Manuals