LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> SX4 LE, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P1510: ECM Back-Up Power Supply Malfunction >> DTC Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Troubleshooting

DTC TROUBLESHOOTING PROCEDURES

Step Action YES NO
1 Was "Engine and Emission Control System Check" performed?  Go to Step 2. Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK .
2 Battery voltage supply circuit check 
  1. Turn ignition switch to OFF position.
  2. Remove ECM from its bracket with ECM connectors connected.
  3. Measure ECM back-up power supply voltage between ECM connector and vehicle body ground.

    Is voltage 10 - 14 V? 

 Intermittent trouble. Check for intermittent referring to INTERMITTENT AND POOR CONNECTION INSPECTION . If OK, substitute a known-good ECM and recheck. ECM back-up power supply circuit is open or short.
scientia non olet · About LEMON Manuals