LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> SX4 LE, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine General Information And Diagnosis >> Diagnostic Information and Procedures >> DTC P1116: Engine Coolant Temperature Circuit Performance at Engine Soaking >> DTC Confirmation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC Confirmation Procedure

NOTE: Check to make sure that following conditions are satisfied when using this "DTC Confirmation Procedure".
  • The following DTCs are not detected: DTCs related to ECT sensor (other than P1116) and IAT sensor.
  1. With ignition switch OFF, connect scan tool.
  2. Turn ON ignition switch and clear DTC using scan tool.
  3. Start engine and warm up to normal operating temperature.
  4. Confirm that any DTC are not detected.
  5. Turn ignition switch OFF and leave for 6 hours.
  6. Check DTC and pending DTC.
scientia non olet · About LEMON Manuals