LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> SX4 2WD L4-2.0L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Steering Angle Sensor >> Service and Repair >> (ESP) Steering Angle Sensor Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

(ESP) Steering Angle Sensor Removal and Installation

Steering Angle Sensor Removal and Installation

Removal
1. Remove steering wheel and contact coil cable assembly. Refer to Steering Wheel Removal and Installation and Contact Coil Cable Assembly Removal and Installation.
2. Remove steering angle sensor (2) from contact coil cable assembly (3) while opening fitting parts (1) of contact coil cable assembly.





Installation
1. Install steering angle sensor (2) by fitting engagement parts (1) of contact coil cable assembly to claws of steering angle sensor as shown in figure.





2. Install contact coil cable assembly and steering wheel. Refer to Contact Coil Cable Assembly Removal and Installation and Steering Wheel Removal and Installation.
scientia non olet · About LEMON Manuals