LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Reno Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission >> Repair Instructions >> Shift Linkage Assembly Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Linkage Assembly Removal and Installation: Installation

  1. Install the shift linkage assembly.
  2. Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.
    Fig 1: Identifying Fixing Shaft Pin
    G04817521Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the universal joint to the transaxle.
  4. Install the clip and the bolt from universal joint.
  5. Install the rod clamp. Refer toShift Linkage Adjustment  .
  6. Adjust the shift linkage. Refer to Shift Linkage Adjustment  .
  7. Connect the negative battery cable.
    Fig 2: Identifying Clip And Bolt Of Universal Joint
    G04817520Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals