Input Shaft and Cluster Gear Disassembly and Assembly: Disassembly

Remove the detent screw at the end of the input driveshaft.

Fig 1: Removing Detent Screw
Courtesy of SUZUKI OF AMERICA CORP.
Remove the snap ring at the base of the gear cluster.

Fig 2: Identifying Snap Ring At Base Of Gear Cluster
Courtesy of SUZUKI OF AMERICA CORP.
Press the input driveshaft from the input shaft cluster gear using the universal bearing puller J-22912-01.

Fig 3: Identifying Universal Bearing Puller J-22912-01
Courtesy of SUZUKI OF AMERICA CORP.
Remove the cluster shaft bearing from the input shaft gear cluster using universal bearing puller J-22912-01.

Fig 4: Identifying Universal Bearing Puller J-22912-01
Courtesy of SUZUKI OF AMERICA CORP.