Input Shaft and Cluster Gear Disassembly and Assembly: Assembly

Press the cluster shaft bearing onto the input shaft gear cluster.

Fig 1: Pressing Cluster Shaft Bearing Onto Input Shaft Gear Cluster
Courtesy of SUZUKI OF AMERICA CORP.
Press the input driveshaft into the input shaft gear cluster assembly.

Fig 2: Identifying Input Driveshaft
Courtesy of SUZUKI OF AMERICA CORP.
Install the snap ring at the base of the gear cluster.

Fig 3: Identifying Snap Ring At Base Of Gear Cluster
Courtesy of SUZUKI OF AMERICA CORP.
Install the detent screw at the end of the input driveshaft.
Tighten:

Tighten the input driveshaft detent screw to 15 N.m (11 lb-ft).

Fig 4: Removing Detent Screw
Courtesy of SUZUKI OF AMERICA CORP.