Power Window Regulator Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the window regulator with the nuts.
Tighten
Tighten the window regulator nuts to 8 N.m (71 lb-in).
- Connect the electrical connector.
- Install the door glass. Refer to "FRONT DOOR GLASS REMOVAL AND INSTALLATION :".
- Connect the negative battery cable.