Dust Boot Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Install the dust boot.
Install the tie rod end dust boot retaining clamp. Install the cylinder end dust boot retaining clamp with the installer KM-J-22610.
Install the outer tie rod. Refer to "OUTER TIE ROD REMOVAL AND INSTALLATION :".
Install the wheel. Refer to "WHEEL REMOVAL AND INSTALLATION :".
Lower the vehicle.

Fig 1: Installing Tie Rod End Dust Boot Retaining Clamp
Courtesy of SUZUKI OF AMERICA CORP.