LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Reno Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 258 (Engine Performance - Diagnostics - Introduction) >> General Description >> OBD System Description - EVAP Control System Monitor >> Fuel Level Noisy Signal >> Enable Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Enable Conditions

WARNING: This page is about a different car, the 2006 Suzuki Reno and 2006 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Determination of Steady Conditions

IF Engine Running = RUN

Delta MAP =< 10 kPa

AND Delay Timer >= 5 s

THEN Set Delta MAP Condition Not Exceeded Flag to TRUE = TRUE

OR

Delta RPM =< 50 RPM

AND Delay Timer >= 5 s

THEN Set Delta RPM Condition Not Exceeded Flag to TRUE = TRUE

OR

Throttle Position =< 1.9989%

AND Delay Timer >= 5 s

THEN Set TPS Condition Not Exceeded Flag to TRUE = TRUE

OR

Vehicle Speed >= 1 kph

AND For Delay Timer of >= 5 s

THEN Set V. Speed Condition Not Exceeded Flag to TRUE = TRUE

Determination of Noisy Signal Enable Condition

IF Engine Running = RUN

AND Intake Air temperature >= -10

AND Fuel Level Active Fault Present = FALSE

AND Noisy Signal Disabling Faults Present? = FALSE

AND Delta MAP Condition Exceeded = FALSE

AND Delta RPM Condition Exceeded = FALSE

AND TPS Condition Exceeded = FALSE

AND Vehicle Speed Condition Exceeded = FALSE

THEN Set Enable Criteria Met Conditions are Satisfied = TRUE