DTC Troubleshooting
NOTE:
Before this trouble shooting is performed, read the precautions for DTC troubleshooting referring to PRECAUTIONS FOR DTC TROUBLESHOOTING
DTC TROUBLESHOOTING CHART
| Step | Action | YES | NO |
|---|---|---|---|
| 1 | Was "Engine and Emission Control System Check" performed? | Go to Step 2. | Go to ENGINE AND EMISSION CONTROL SYSTEM CHECK . |
| 2 | ECT sensor circuit and thermostat check
Is each result satisfied its specification? |
Go to Step 3. | Repair or replace defective part. |
| 3 | Wire harness check
Is check result as specified? |
Go to Step 4. | Replace ECT sensor. |
| 4 | IAT sensor circuit check
Is each result satisfied its specification? |
Go to Step 5. | Replace or replace defective wire harness. |
| 5 | IAT sensor performance check
Is check result as specified? |
Substitute a known good ECM and recheck. | Replace MAF and IAT sensor. |