Service Manual Update: Front And Rear Wheel Alignment Specification Change (TS 02 08237)
Publication date: 2013-01-25Reference number: TS 02 08237
SERVICE MANUAL UPDATE: FRONT AND REAR WHEEL ALIGNMENT SPECIFICATION CHANGE
TECHNICAL SERVICE BULLETIN
Reference Number(s): TS 02 08237, Date of Issue:
January 25, 2013
| SUZUKI: | 2007~2008 GRAND VITARA (JB627) |
| SECTION: | Suspension |
CONDITION
Front and rear wheel alignment toe tolerance specification for each wheel has been changed.
CAUSE
Tolerance change.
CORRECTION
Please update your Service Manual according to attached sheets.
AFFECTED SERVICE MANUAL(S)
AFFECTED SERVICE MANUALS
| MANUAL NAME | PART NUMBER | Page(s) | CORRESPONDING SECTION |
|---|---|---|---|
| 2007MY Grand Vitara (JB627) Service Manual | 99500S66J10-33E | 2A-3 | Sec.2A: Suspension General Diagnosis "Wheel Alignment Specifications" |
| 2008MY Grand Vitara (JB627) Service Manual | 99500S66J20-33E |
NOTE:
These updates will be reflected in future printings of the service manuals. If the reprint date on the inside back cover of the manual is later than the issue date of this bulletin, the manual will have been updated.
Dealership Circulation - Initial and file:
SEC.2A: SUSPENSION GENERAL DIAGNOSIS
Wheel Alignment Specifications
Wheel alignment specifications
| Item | Front | Rear | |
|---|---|---|---|
| Toe ("b" - "a") (mm) (in.) Toe ("d") (degree) (each wheel)*1 |
0.0 ± 2.0 (0 ± 0.0787) 0° ± 5' |
IN 6.0 ± 2.0 (0.2362 ± 0.0787) 0° 14' ± 5' |
|
| Camber "c" (degree) | 0° 00' ± 1° | -1° 15' ± 30' | |
| Caster (degree) | 2° 30' | - | |
| Side Slip (mm/m) (on one person)*1 (in./3.3 ft) |
IN 1.5 to OUT 1.5 IN 0.0591 to OUT 0.0591 |
IN 7.5 IN 0.2953 |
|
| Steering angle | Inside | 37.0° ± 3° | - |
| (Turning angle | Outside | 32.0° ± 3° | - |
NOTE:
*1: Reference information.
- Toe value in the specifications table was measured by using a toe-in gauge.
- As for front camber and caster, regulation is impossible.
*1: Reference information.