LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2008 >> Forenza L4-2.0L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Seals and Gaskets >> Service and Repair >> Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Procedures

Drive Axle Oil Seal Removal and Installation
Removal
1. Disconnect the negative battery cable.
2. Remove the drive axles.
3. Remove the transaxle drive seal using a screwdriver. If necessary, crush the seal first with the screwdriver in order to loosen the seal from the case.





Installation

Tools Required:
DW260-030-01 Axle Seal Installer (LH)
DW260-030-02 Axle Seal Installer (RH)

1. Install the transaxle drive seal using the axle seal installer DW260-030-01 (LH) or DW260-030-02 (RH).
2. Install the drive axles.
3. Connect the negative battery cable.





scientia non olet · About LEMON Manuals