Circuit/System Verification
- Engine idling at the normal operating temperature.
- Verify that DTCs: DTC P0011, P0014, P0021, P0024, P0201-P0206, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277, P0335, P0336, P0338, P2088, P2090, P2092, P2094, P2300, P2301, P2303, P2304, P2306, P2307, P2309, P2310, P2312, P2313, P2315, or P2316 are not set.
- Observe the Misfire Current Cyl. 1-6 parameters with a scan tool. The Misfire Current Counters should not be incrementing.
- Engine idling, perform the cylinder power balance test with a scan tool to isolate the misfiring cylinder. The engine speed should change when each injector is disabled.