Circuit/System Verification
- Ignition ON, observe the DTC information with a scan tool. Verify that DTCs P0137, P0138, P0140, P0157, P0158, or P0160 are not set.
- Operate the engine above 1,200 RPM for 30 seconds, observe the HO2S voltage parameter. The reading should fluctuate above and below the range of 350-550 mV.
- If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.