Conditions for Running the DTC

NOTE: The following conditions must be met prior to the ignition OFF test.

DTCs P0100, P0101, P0102, P0103, P0111, P0112, P0113, P0116, P0117, P0118, P0119, P0125, P0128, P0443, P0446, P0449, P0451, P0452, P0453, P0458, P0459, P0496, P0498, P0499, P0560, P0562, P0563, P0700, P2227, P2228, and P2229 are not set.
The ignition voltage is more than 10.8 volts.
A refueling event is not detected
The fuel volatility is not excessive.
The ambient air temperature (AAT) is between 2-32°C (35-90°F).
The intake air temperature (IAT) is between 2-32°C (35-90°F) at start-up.
The engine coolant temperature (ECT) is less than 42°C (108°F) at start-up.
The ECT and the IAT are within 10°C (18°F) of each other at engine start-up.
The barometric pressure (BARO) is more than 68 kPa.
The engine coolant temperature (ECT) during the previous ignition was more than 74°C (165°F).
The fuel level is between 12-88%.
The vehicle traveled more than 8 km (5 mi) with vehicle speed above 2.5 km/h (1.6 mph).
The engine run time is more than 10 minutes.
DTC P0442 runs once per engine off cycle when the above conditions have been met prior to engine shut down.