Circuit/System Verification
- Ignition ON, observe the DTC information with a scan tool. DTC P0698 or P0699 should not be set.
- Clear the DTC Info with a scan tool. Attempt to start the engine, observe the DTC information with a scan tool. DTC P0335, P0336, or P0338 should not set.
- Move related harnesses/connectors of the CKP sensor and verify the engine does not stumble, stall, or change engine speed.
- If the vehicle passes the Circuit/System Verification test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records List.