LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Limited, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Transmission Control Module Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the battery tray. Refer to BATTERY TRAY REPLACEMENT .
    NOTE: The transaxle manual shaft must be in neutral (N) position prior to re-installing the transmission control module (TCM).
  2. Apply the parking brake and place control shift lever in neutral (N).
    Fig 1: Identifying Manual Shaft Detent Lever & TCM
    G04845924Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the manual shaft detent lever (2). Refer to REMOVAL PROCEDURE .
  4. Disconnect the electrical connectors from the TCM.
  5. Remove the TCM bolts (3).
  6. Remove the TCM (4) by sliding off of the manual shaft.
scientia non olet · About LEMON Manuals