Removal Procedure

WARNING:

Fig 1: Identifying Fuel Feed Line Quick Connect Fitting Retainer

Courtesy of SUZUKI OF AMERICA CORP.

Relieve the fuel system pressure. Refer to the FUEL PRESSURE RELIEF (WITH J 34730-1A) and FUEL PRESSURE RELIEF (WITHOUT J 34730-1A) .
Remove the fuel feed line quick connect fitting retainer.

Fig 2: Blowing Dirt Out Of Fitting Using Compressed Air
Courtesy of SUZUKI OF AMERICA CORP.
WARNING:
- Refer to FUEL AND EVAPORATIVE EMISSION HOSE/PIPE CONNECTION CLEANING NOTICE .
- Refer to SAFETY GLASSES CAUTION .
Blow dirt out of the fitting using compressed air.

Fig 3: Inserting Tool Into Female Connector
Courtesy of SUZUKI OF AMERICA CORP.
Choose the correct tool from the J 37088-A for the size of the fitting. Insert the tool into the female connector, then push inward in order to release the locking tabs.

Fig 4: Pulling Connector
Courtesy of SUZUKI OF AMERICA CORP.

WARNING:
Refer to RELIEVING FUEL PRESSURE CAUTION .
Pull the connection apart.
Use a clean shop towel in order to wipe off the male pipe end.
Inspect both ends of the fitting for dirt and burrs. Clean or replace the components as required.