LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Limited, AWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

Fig 1: Identifying Fuel Pump Module Harness Electrical Connector
G04843423Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the fuel tank. Refer to REMOVAL PROCEDURE  and REMOVAL PROCEDURE .
  2. Disconnect the fuel pump module harness electrical connector from the fuel tank pressure sensor.
    Fig 2: Identifying Fuel Pump And Sensor
    G04843424Courtesy of SUZUKI OF AMERICA CORP.
  3. Position 2 flat-bladed screwdrivers, one on each side of the sensor, near the vacuum port.
  4. Carefully use the screwdrivers to lift and release the sensor from the fuel pump module.
scientia non olet · About LEMON Manuals