Installation Procedure

Fig 1: Identifying Catalytic Converter Heat Shield (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Position the catalytic converter heat shield, and insert the catalytic converter heat shield between the underbody and the dash panel heat shield.
Install the NEW rivets.

Fig 2: Identifying New Catalytic Converter Rivets
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Install the fuel tank strap bolt.
Tightening torque

Tighten the bolt to 25 N.m (18 lb ft).

Fig 3: Identifying Fuel Tank Strap Bolt
Courtesy of SUZUKI OF AMERICA CORP.
If the vehicle is equipped with AWD, install the propeller shaft underbody guard loop and bolts.
Tightening torque

Tighten the bolts to 25 N.m (18 lb ft).
Install the muffler assembly. Refer to Installation Procedure .