Component Testing
Ignition Switch
Using the Resistance Test below, check the resistance between the pins of the ignition switch listed in each switch position listed.
- If any reading is other than specified, replace the ignition switch.
RESISTANCE TEST REFERENCE
| Ignition Switch Position | Pins 3 and 1 | Pins 3 and 2 | Pins 3 and 5 | Pins 3 and 4 | Pins 5 and 4 |
|---|---|---|---|---|---|
| Off Key Out | Infinite | Infinite | Infinite | Infinite | Infinite |
| Off Key IN | Infinite | Infinite | < 5.0 Ω | Infinite | Infinite |
| Accessory | Infinite | < 5.0 Ω | Infinite | Infinite | Infinite |
| Run | < 5.0 Ω | < 5.0 Ω | Infinite | Infinite | < 5.0 Ω |
| Start | < 5.0 Ω | Infinite | Infinite | Infinite | 1275-1325 Ω |