LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tire Pressure Monitoring System >> Repair Instructions >> Tire Pressure Sensor Grommet Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Clean any dirt or debris from the grommet sealing areas.
  2. Install the grommet on the sensor valve stem.
    Fig 1: Positions For Inserting Tire Pressure Sensor
    G04843300Courtesy of SUZUKI OF AMERICA CORP.
  3. Insert the sensor in the wheel hole with the air passage facing away from the wheel.
    CAUTION: Refer to FASTENER NOTICE .
  4. Install the sensor nut and position the sensor body parallel to the inside wheel surface while torquing.

    Tightening torque 

    Tighten the sensor nut to 7 N.m (62 lb in)  .

    NOTE: Before installing the tire on the wheel, note the following items to avoid tire pressure sensor damage upon tire mounting:
    • Position the mounting/dismounting head 180 degrees from the valve stem.
    • Position the bead transition area 45 degrees counterclockwise of the valve stem.
    • Using the tire machine, rotate the tire/wheel assembly clockwise when transferring the tire bead to the inside of the wheel rim.
    • Repeat items for outer bead.
  5. Install the tire on the wheel. Refer to TIRE MOUNTING AND DISMOUNTING .
  6. Install the tire/wheel assembly on the vehicle. Refer to INSTALLATION PROCEDURE .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals