LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector From Bank 2 Exhaust Camshaft Position (CMP) Sensor
G04841335Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the air cleaner assembly. Refer to REMOVAL PROCEDURE .
  2. Disconnect the engine wiring harness electrical connector (6) from the bank 2 exhaust camshaft position (CMP) sensor.
    Fig 2: Identifying CMP Sensor & Bolt (1 Of 2)
    G04841336Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the CMP sensor bolt.
  4. Remove the CMP sensor.
scientia non olet · About LEMON Manuals