Removal Procedure

Fig 1: Disconnecting EVAP Canister Fresh Air Hose/Pipe

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: The EVAP emissions canister is located under the center of the vehicle. It has 3 EVAP line connections:

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
CAUTION: Clean all fuel pipe connections and surrounding areas before disconnecting the fuel pipes to avoid contamination of the fuel system.
Disconnect the EVAP canister fresh air hose/pipe from the fuel tank fresh air hose/pipe (2). Refer to REMOVAL PROCEDURE .
Disconnect the EVAP canister vent hose/pipe from the EVAP canister. Refer to REMOVAL PROCEDURE .

Fig 2: Disconnecting EVAP Canister Purge Hose/Pipe
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the EVAP canister purge hose/pipe (1) from the EVAP canister.
Remove the EVAP canister-to-underbody nuts (3).
Lower the EVAP canister.

Fig 3: Disconnecting EVAP Vent Solenoid Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the EVAP vent solenoid electrical connector (1).
Remove the EVAP canister (4) from the vehicle.