Conditions for Running the DTC

DTCs P0121, P0122, P0123, P0221, P0222, P0223, P0335, P0336, or P0338 are not set.
The engine speed is between 420-7,000 RPM and steady.
The engine run time is more than 45 seconds.
The evaporative emissions (EVAP) leak detection is not active.
The delivered torque signal is more than 10% at idle.
The delivered torque signal is between 9-30 percent with the transmission in drive.
The intake air temperature (IAT) is more than -30°C (-22°F).
The A/C compressor clutch is not changing states.
The torque management is not active.
The antilock brake system/traction control system (ABS/TCS) is not active.
The ECM is not receiving a rough road signal.
The fuel level is more than 12%.
The ECM is not in fuel cut-off or decel fuel cut-off mode.
The throttle angle is steady.
DTCs P0300 through P0306 run continuously when the above conditions exist for at least 1000 engine revolutions.