LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, FWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Manifold Heat Shield Replacement - Left Side >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING:
  1. Remove the fuel injector sight shield, if necessary. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Disconnect the engine wiring harness electrical connector (3) from the heated oxygen sensor (HO2S) electrical connector (4).
  3. Remove the HO2S electrical connector retainer (5) from the retainer clip.
    Fig 1: Disconnecting HO2S Electrical Connector Retainer (5) From Retainer Clip
    G04843581Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the exhaust manifold heat shield bolts.
  5. Remove the exhaust manifold heat shield, sliding the shield up over the HO2S pigtail.
    Fig 2: Removing Exhaust Manifold Heat Shield
    G04843582Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals