Automatic Transmission Schematic Icons

ICON DEFINITION

Icon	Icon Definition
Courtesy of SUZUKI OF AMERICA CORP.	NOTE: Twisted-pair wires provide an effective "shield" that helps protect sensitive electronic components from electrical interference. If the wires were covered with shielding, install new shielding. In order to prevent electrical interference from degrading the performance of the connected components, you must maintain the proper specification when making any repairs to the twisted-pair wires shown: The wires must be twisted a minimum of 10 turns per 31 cm (12 in) as measured anywhere along the length of the wires The outside diameter of the twisted wires must not exceed 6.0 mm (.25 in)
Refer to SPLICING TWISTED OR SHIELDED CABLE .

Icon

Icon Definition

Courtesy of SUZUKI OF AMERICA CORP.

NOTE: Twisted-pair wires provide an effective "shield" that helps protect sensitive electronic components from electrical interference. If the wires were covered with shielding, install new shielding.
In order to prevent electrical interference from degrading the performance of the connected components, you must maintain the proper specification when making any repairs to the twisted-pair wires shown:

The wires must be twisted a minimum of 10 turns per 31 cm (12 in) as measured anywhere along the length of the wires
The outside diameter of the twisted wires must not exceed 6.0 mm (.25 in)

Refer to SPLICING TWISTED OR SHIELDED CABLE .