Wiring Harness Removal

Reference: CONTROL VALVE BODY COVER REMOVAL .

Fig 1: Identifying Wiring Harness Connectors

Courtesy of SUZUKI OF AMERICA CORP.

1. Disconnect the wiring harness connectors 1-8.
   Fig 2: Identifying Fluid Temperature Sensor Bolt & Clamp

   Courtesy of SUZUKI OF AMERICA CORP.
2. Remove the fluid temperature sensor bolt (31).
3. Remove the fluid temperature sensor clamp (49).
4. Remove the fluid temperature sensor (36) and the O-ring (32) from the control valve body assembly.
   Fig 3: Removing A/T Control Wiring Harness Connector Retainer

   Courtesy of SUZUKI OF AMERICA CORP.
5. Remove the A/T control wiring harness connector retainer (69).
   Fig 4: Identifying Transmission Wiring Harness Assembly & Automatic Transmission Wiring Connector Seal

   Courtesy of SUZUKI OF AMERICA CORP.
   NOTE: Do not break the wiring harness connectors or the fluid temperature sensor.
6. Remove the transmission wiring harness assembly (33) from the transmission case assembly through the wiring harness bore.
7. Remove the TCM seal (72) and the automatic transmission wiring connector seal (46) from the connector.