Third Gear Band Servo Piston Pin Measurement

Reference: FRONT DIFFERENTIAL TRANSFER DRIVE GEAR ASSEMBLY REMOVAL .

Fig 1: Applying Compressed Air To Servo Apply Passage

Courtesy of SUZUKI OF AMERICA CORP.

1. Mark the servo piston pin in the released position (1).
   WARNING: Wear safety glasses when using compressed air in order to prevent eye injury.
2. Apply compressed air to the servo apply passage (3), and mark the apply position on the piston pin (2).
3. Measure the distance between the release and apply marks (a). Refer to THIRD GEAR BAND SERVO PISTON PIN SELECTION  to select the correct servo piston pin.