LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Drive Axle Shaft Seal Replacement (Right) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Place a drain pan under the transaxle to catch any spilled transaxle fluid.
  3. Remove the right front wheel drive shaft. Refer to REMOVAL PROCEDURE and REMOVAL PROCEDURE .
  4. If equipped with an axle seal dust cover, discard it and do not replace it.
    Fig 1: Identifying Right Drive Axle Seal (Right) (1 Of 2)
    G04845991Courtesy of SUZUKI OF AMERICA CORP.
  5. Using the J 45000 remove the right drive axle seal from the transaxle.
  6. Clean the seal bore in the transaxle housing.
scientia non olet · About LEMON Manuals