LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Drive Axle Shaft Seal Replacement (Left) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Place a drain pan under the transaxle to catch any spilled transaxle fluid.
  3. Remove the left front axle shaft. Refer to REMOVAL PROCEDURE and REMOVAL PROCEDURE .
    Fig 1: Removing Axle Seal From Transaxle Using J 45000 (Left)
    G04845989Courtesy of SUZUKI OF AMERICA CORP.
  4. Using the J 45000, remove the axle seal from the transaxle and discard.
  5. Clean the seal bore in the transaxle housing.
scientia non olet · About LEMON Manuals