LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Transmission >> Repair Instructions >> Drive Axle Shaft Seal Replacement (Left) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Left Axle Seal (Left)
G04845990Courtesy of SUZUKI OF AMERICA CORP.
  1. Using the J 44809, install the left axle seal into the transaxle.
  2. Install the left front axle shaft. Refer to INSTALLATION PROCEDURE and INSTALLATION PROCEDURE .
  3. Lower the vehicle.
    NOTE: Dextron®III automatic transmission fluid is not compatible with this transaxle. If Dextron®III ATF is used, transaxle failure will result. This transaxle uses GM T-IV fluid GM P/N 88900925.
  4. Inspect the transaxle fluid level. Refer to TRANSMISSION FLUID CHECK .