LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Repair Instructions >> Wheel Stud Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  2. Remove the tire and wheel assembly. Refer to REMOVAL PROCEDURE .
  3. Remove the wheel bearing/hub replacement. Refer to REMOVAL PROCEDURE .
    Fig 1: Removing Wheel Bearing/Hub
    G04843667Courtesy of SUZUKI OF AMERICA CORP.
    Fig 2: Pressing Out Wheel Stud From Wheel Bearing/Hub Assembly Using J 43631
    G04843668Courtesy of SUZUKI OF AMERICA CORP.
  4. Using the J 43631, press out the wheel stud from the wheel bearing/hub assembly.
scientia non olet · About LEMON Manuals