Stabilizer Shaft Insulator Replacement

Fig 1: Identifying Stabilizer Shaft Insulator

Courtesy of SUZUKI OF AMERICA CORP.

PRELIMINARY PROCEDURE REFERENCE

Callout	Component Name
Preliminary Procedure Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
1	Stabilizer Shaft Insulator Bolt (Qty: 4) CAUTION: Refer to FASTENER NOTICE . Tightening torque 70 N.m (52 lb ft). Procedure Lower the rear suspension support. Refer to SUPPORT REPLACEMENT (AWD VEHICLES) and SUPPORT REPLACEMENT (FWD VEHICLES) . Tip: Lower the rear suspension support enough to remove the stabilizer shaft clamp bolt.
2	Stabilizer Shaft Insulator Clamp (Qty: 2)
3	Stabilizer Shaft Insulator (Qty: 2)