LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Repair Instructions >> Rear Toe Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Toe Adjustment

Fig 1: Locating Suspension Adjustment Link-To-Frame Fastener Bolt
G04843734Courtesy of SUZUKI OF AMERICA CORP.
  1. Loosen the suspension adjustment link-to-frame fastener enough to allow for movement.
    NOTE: The frame of the vehicle is slotted, a cam nut is available for service if required.
  2. Rotate the suspension adjustment link cam nut in the direction necessary to correct the toe angle.
  3. Snug the suspension adjustment link-to-frame fastener, do not tighten at this time.
  4. Reinspect the rear toe specifications and adjust as necessary.
    CAUTION: Refer to FASTENER NOTICE .
  5. Hold the nut and tighten the link-to-frame fastener bolt.

    Tightening torque 

    Tighten the bolt to 110 N.m (81 lb ft). 

  6. Repeat the procedure for the other rear wheel.
scientia non olet · About LEMON Manuals