LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension >> Repair Instructions >> Rear Camber Adjustment
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Camber Adjustment

Fig 1: Identifying Upper Control Arm-To-Frame Bolt
G04843733Courtesy of SUZUKI OF AMERICA CORP.
  1. Loosen the upper control arm-to-frame fastener enough to allow movement.
    NOTE: The frame of the vehicle is slotted, turning the cam nut will move the camber in to the designated location.
  2. Rotate the upper control arm-to-frame fastener in the direction necessary to the correct the camber measurement.
  3. Snug the upper control arm-to-frame fastener, do not tighten at this time.
  4. Reinspect the rear camber specifications and adjust as necessary.
    CAUTION: Refer to FASTENER NOTICE .
  5. Hold the nut and tighten the upper control arm-to-frame bolt.

    Tightening torque 

    Tighten the bolt to 110 N.m (81 lb ft). 

  6. Repeat the procedure for the other rear wheel.
scientia non olet · About LEMON Manuals