Collapse Measurement

A vehicle involved in an accident resulting in sheet metal damage or driver-side air bag deployment will require an inspection for steering column collapse. If the steering column collapse measurement is greater than 3 mm than the steering column must be replaced.

For steering column collapse measurement, use the following procedure:

1. Remove the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .
   Fig 1: Identifying Upper Steering Column Mounting Capsule Nuts

   Courtesy of SUZUKI OF AMERICA CORP.
2. Inspect the upper steering column mounting capsule nuts for movement (a). If the steering column collapse measurement is greater than 3 mm than the steering column must be replaced. Refer to STEERING COLUMN REPLACEMENT .
3. Install the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT .