LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instruction >> O-Ring Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Tightening Fitting Nut
G04844265Courtesy of SUZUKI OF AMERICA CORP.
  1. Disassemble the A/C refrigerant components. Refer to the appropriate repair procedure
    • For compression style fittings use a back up wrench on the fitting (2) and loosen the fitting nut (1).
    • For banjo style fittings remove the bolt retaining the banjo type fitting.
  2. Remove the O-ring seal from the A/C refrigerant component.
  3. Inspect the O-ring seal for signs of damage to help determine the root cause of the failure.
  4. Inspect the A/C refrigerant components for damage or burrs. Repair if necessary.
    NOTE: Cap or tape the open A/C refrigerant components immediately to prevent system contamination.
  5. Cap or tape the A/C refrigerant components.
  6. Discard the O-ring seal.
scientia non olet · About LEMON Manuals