Removal Procedure

Recover the refrigerant. Refer to REFRIGERANT RECOVERY AND RECHARGING .
Remove the front fascia. Refer to FRONT BUMPER FASCIA REPLACEMENT .

Fig 1: Identifying Battery Box Air Duct
Courtesy of SUZUKI OF AMERICA CORP.
Remove the battery box air duct.

Fig 2: Identifying Condenser Radiator Fan Module Panel
Courtesy of SUZUKI OF AMERICA CORP.
Remove the condenser radiator fan module (CRFM) closeout panel.

Fig 3: Identifying Condenser Liquid Line Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the liquid line nut from the condenser.
Remove the liquid line from the condenser.
Install a protective cap to the liquid line to prevent contamination and desiccant saturation.

Fig 4: Identifying Compressor Hose Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the compressor hose nut from the condenser.
Remove the compressor hose from the condenser.
Install a protective cap to the compressor hose to prevent contamination and desiccant saturation.

Fig 5: Identifying CRFM Bracket Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the CRFM bracket bolts from the radiator support.
Remove the CRFM brackets from the vehicle.

Fig 6: Identifying Radiator Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Remove the bolts retaining the top of the condenser to the radiator.
Remove the condenser from the vehicle.