LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instruction >> Air Inlet Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the air inlet assembly.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the air inlet assembly screws.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

    Fig 1: Identifying Recirculation Actuator Screws
    G04844378Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the recirculation actuator.
  4. Install the recirculation actuator screws.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  5. Install the electrical connector to the recirculation actuator.
  6. Install the HVAC module. Refer to HVAC MODULE ASSEMBLY REPLACEMENT .
scientia non olet · About LEMON Manuals