LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Intake >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector From Bank 2 Intake (CMP) Actuator Solenoid Valve
G04841351Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the engine mount strut bracket. Refer to ENGINE MOUNT STRUT BRACKET REPLACEMENT - RIGHT SIDE .
  2. Disconnect the engine wiring harness electrical connector (2) from the bank 2 intake camshaft position (CMP) actuator solenoid valve.
    Fig 2: Identifying CMP Actuator Solenoid Valve & Bolt (1 Of 2)
    G04841352Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the CMP actuator solenoid valve bolt.
  4. Remove the CMP actuator solenoid valve.
  5. Inspect the CMP actuator solenoid valve seal for damage and replace as necessary.
scientia non olet · About LEMON Manuals