LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 2 (Left Side) Exhaust >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying CMP Actuator Solenoid Valve & Bolt
G04841357Courtesy of SUZUKI OF AMERICA CORP.
  1. Inspect the CMP actuator solenoid valve seal for damage. Replace the seal if necessary.
  2. Install the CMP actuator solenoid valve.
    CAUTION: Refer to FASTENER NOTICE .
  3. Install the CMP actuator solenoid valve bolt.

    Tightening torque 

    Tighten the bolt to 10 N.m (89 lb in)  .

    Fig 2: Connecting Engine Wiring Harness Electrical Connector To Bank 2 Exhaust CMP Actuator Solenoid Valve
    G04841358Courtesy of SUZUKI OF AMERICA CORP.
  4. Connect the engine wiring harness electrical connector (7) to the bank 2 exhaust CMP actuator solenoid valve.
  5. Install the engine mount strut bracket. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals