LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instruction >> Camshaft Position Actuator Solenoid Valve Solenoid Replacement - Bank 1 (Right Side) Intake >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

Fig 1: Disconnecting Engine Wiring Harness Electrical Connector From Bank 1 Intake (CMP) Actuator Solenoid Valve
G04841343Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the air cleaner assembly. Refer to REMOVAL PROCEDURE .
  2. Disconnect the engine wiring harness electrical connector (3) from the bank 1 intake camshaft position (CMP) actuator solenoid valve.
    Fig 2: Identifying CMP Actuator Solenoid Valve
    G04841344Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the CMP actuator solenoid valve bolt.
  4. Remove the CMP actuator solenoid valve.
  5. Inspect the CMP actuator solenoid valve seal and replace as necessary.
scientia non olet · About LEMON Manuals