LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Aux. Emission Control Devices >> Repair Instructions >> Evaporative Emission Canister Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Connecting EVAP Vent Solenoid Electrical Connector
G04843333Courtesy of SUZUKI OF AMERICA CORP.
  1. Connect the EVAP vent solenoid electrical connector (1).
  2. Install the EVAP canister (4) to the underbody of the vehicle.
    Fig 2: Installing EVAP Canister-To-Underbody Nuts
    G04843334Courtesy of SUZUKI OF AMERICA CORP.
    CAUTION: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the EVAP canister-to-underbody nuts (3).

    Tightening torque 

    Tighten the nuts to 9 N.m (80 lb in). 

  4. Connect the EVAP canister purge hose/pipe (1) to the EVAP canister.
    Fig 3: Connecting EVAP Canister Vent Hose/Pipe
    G04843335Courtesy of SUZUKI OF AMERICA CORP.
  5. Connect the EVAP canister vent hose/pipe (3) to the EVAP canister. Refer to INSTALLATION PROCEDURE .
  6. Connect the EVAP canister fresh air hose/pipe to the fuel tank fresh air hose/pipe (2). Refer to INSTALLATION PROCEDURE .
  7. Lower the vehicle.
scientia non olet · About LEMON Manuals