LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical >> Repair Instructions >> Camshaft Position Actuator Replacement - Bank 2 (Left Side) Intake >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

Fig 1: Identifying Left Intake Camshaft Position Actuator
G04841548Courtesy of SUZUKI OF AMERICA CORP.
  1. Locate the intake camshaft position actuator to the camshaft and loosely install the bolt.
    CAUTION: Refer to TORQUE REACTION AGAINST TIMING DRIVE CHAIN NOTICE .
    NOTE: Use an open-end wrench at the camshaft hex to prevent camshaft/engine rotation.
  2. Tighten the camshaft position actuator bolt. Refer to CAMSHAFT POSITION ACTUATOR INSTALLATION - LEFT SIDE INTAKE (THIRD DESIGN)  and CAMSHAFT POSITION ACTUATOR INSTALLATION - LEFT SIDE INTAKE (FOURTH DESIGN) .
  3. Install the left exhaust camshaft actuator. Refer to INSTALLATION PROCEDURE .
scientia non olet · About LEMON Manuals