LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Water Pump Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Drain the cooling system. Refer to DRAINING AND FILLING COOLING SYSTEM (LY7 GE 47716 FILL)  and DRAINING AND FILLING COOLING SYSTEM (LY7 STATIC FILL) .
  2. Remove the drive belt. Refer to REMOVAL PROCEDURE .
    Fig 1: Retaining Water Pump Pulley
    G04842655Courtesy of SUZUKI OF AMERICA CORP.
  3. Use the EN 46104 in order to retain the water pump pulley.
    Fig 2: Identifying Water Pump Pulley Bolts
    G04842656Courtesy of SUZUKI OF AMERICA CORP.
  4. Remove the water pump pulley bolts.
  5. Remove the water pump pulley.
    Fig 3: Identifying Water Pump Seal & Water Pump Bolts (1 Of 2)
    G04842657Courtesy of SUZUKI OF AMERICA CORP.
  6. Remove the water pump bolts.
  7. Remove the water pump.
  8. Remove and DISCARD the water pump seal.
  9. Carefully clean the water pump sealing surfaces.
scientia non olet · About LEMON Manuals